The specification and procedure for performing effective maintenance in a plant are mentioned below:
-Spare parts replacement and gasket materials for the maintenance should be duly inspected to standard.
-The effective areas of replaceable part reference and service procedure be clarified to manufacturer reference and systems.
-Grades and types of lubricants be clearly identified to standard specification.
-Bearing,oil seals,glands,lip seals references be clearly written and identified to standards.
-Types of coupling,alignment,shimming and their applicable instrument be defined to specification.
-Visual inspection of foundation bolts and their design factors is imperative.
-Mechanical seals standard and specification varies,though they may serve same motive,but check manufacturer design and orientation.
-visually inspect crankshaft journals,crank-web and main bearing ends or seating.
-Note that electronic control module (ECM) of an engine can develop a failure report,therefore often conduct an inspection calibration,to confirm its status.
-Always perform visual inspection on your engine spark plugs and transformers to avoid sudden shut-down or abnormal vibration etc.
Filter cart-rages for air compressors and engine should be inspected and cleaned always to avoid sudden shut-down.
No comments:
Post a Comment