Pages

Saturday, December 17, 2016

BILL OF ESTIMATE FOR COMPLETE ASSEMBLY






                        

       S.NO  DESCRIPTION OF ITEM     UNIT             UNIT PRICE                  AMOUNT(#)
     

          1         Pump casing                              I                     150,000.00                150,000.00
          2         Impeller                                     1                       50,000.00                 50,000.00
          3         seal housing                               1                       15,000.00                 15,000.00
          4          Gasket -larger                           2                          9,000.00                18,000.00
          5          Spigot ring                                1                        25,000.00                25,000.00
          6          Drain plug                                 1                          5,000.00                  5,000.00
          7            Stud (M18)                              16                       1,000.00                 16,000.00
          8           Nut (M18)                                 16                         800.00                  12,000.00  
          9           Cap screws (M12)                     4                           800.00                  12,000.00    
         10          Adapter                                      1                         25,000.00               25,000.00
         11          Inserts                                        1                          16,000.00              16000.00
         12         Guard lock screws(M16)            8                              800.00                 6,400.00                        13          Bearing ( NDE)                          1                           6000.00                  6000.00
         14          Lip seal                                       2                           10,000.00             20,000.00
         15          Roller bearing                             2                          10,000.00              20,000.00
         16          Breather and Filter                      2                          10,000.00              20,000.00
         17          Bearing Housing                         2                           10,000.00             20,000.00
         18          Ball bearing                                 1                           10,000.00             10.000.00
         19          Bearing retainer(DE)                   1                             8.000.00               8,000.00
          20         Capscrew (M12)                          4                             2,000.00               8,000.00                       20         Lock Washers                               2                               500.00              10,000.00
          22         Lock Nut                                     7                                  250.00              1,750.00
          23         Coupling key                               1                              2,000.00               4,000.00
          24         Gasket (smaller)                          1                               5,000.00              5,000.00 

Wednesday, December 14, 2016

MANUFACTURING COST AND ENGINEERING BILL OF ESTIMATE



        S.NO        DESCRIPTION OF MANUFACTURE   UNIT    UNIT COST   AMOUNT
          1             Purchase high speed stainless steel
                         material to specification in the
                          BS.Code 18/8 302S25 (Non-magnetic
                           material)                                                     4            16000          60,000.00
          2               Take to workshop,measure dim.as spec
                           ified in the drawing and cut in power
                           saw machine.                                              3             3,300.00       9,900.00
          3               Inspection of materials to standard spec.
                         Bs.Code.18/8 302S25 (note non magnetic matr.l)
                                 ref.Mech.Eng.Data handbookCarvill.                            4                  10.000.00         30,000.00
          4                Carryout keyway operation in milling
                          Machine.                                                       5              3,500.00       70,000.00
          5                Polish surface to dimension as in surface
                        texture specification                                        5              3,500.00       18,000.00
          6               Mark 25% for Labour cost total.                     1              51,000.00      51,000.00

DEFINITION OF PROJECT ACTIVITY .UNIT




                      THE NUMBER OF EVENT IN ANY PARTICULAR ACTIVITY IS TAKEN
                       AS UNITS OF THE PROJECT. THUS:
  S.NO                       ACTIVITY                     PROGRAMME OR EVENTS         UNITS

Monday, December 12, 2016

PUMP SHAFT- CONCENTRIC TURNING , DESIGN AND CONSTRUCTION SEQUENCE OF OPERATION -2

     
         

         

 S/NO.        DESCRIPTION                                                           TOOLS                                      8              Change tool to threading tool               thread tool,thread chaser,roughing tool and
              and cut M180 x 150 and rough turn            vernier caliper and steel rule.
                       dia.58.1x123      
 
 9.             Rough turn dia.42.1x109.5                             Rough turning tool,vernier caliper
                 to nominal size                                                                     steel rule

 10            Finish turn surface to exact dimension               finishing tool ,steel rule,micrometer
                 to its tolerance range of 0.0i(mm) and 0.02        and vernier caliper.

  11,           Drill end with dia14(mm) bit  to dimension         Attachment steady,vernier caliper
                 and tap to size with M16 X 150 and chamfer         tapping tool and drill bits.
                 45x2(mm) in all steps,debor edges and polish
                 surface to precise dimension..
  12          
               Unchuck job and mount and mount in vee-block             vee-block,surface plate,dial guage
                  block on a face plate to check diameter,with dial       with magnetic stand.
                  to exact surface roughness.
                                   
                                                          ALL DIMENSIONS ARE IN (mm)          

Sunday, December 11, 2016

DESIGN OF A PUMP SHAFT, SEQUENCE OF OPERATION (CONCENTRIC TURNING.

S/NO                             DESCRIPTION                                                  TOOLS
  1                       Chuck HSS BAR IN THE LATHE MACHINE               CHUCK KEY, MEASU
                           ,DRILL AND POSITION TAILSTOCK,SURF              RING TOOLS,VERNIE
                            TURN TO IO6.1X351                                                 TAPE,ROUGHING TO
                                                                                                               OLS

  2                         SURFACE FINISH  dia 106.10x351 to dimension          vernier caliper,measuring
                             and rough turn surface to dimension dia..1x256 and         tape, finishing tool, rou
                              dia.85.1x251                                                               ghing tools.
  3                         Rough turn surface to dimension dia.58.1x221, dia           steel rule,roughing tool
                             55.1x200.5 and dia 40.1x76                                             vernier caliper.
  4                         Finish turn surface to exact dimension.drill internal          finishing tool roughing
                             dia.16 mm,tap hole to size of M18, chamfer ends            drill bits,tapping tools
                               to 2x45 for the entire steps,debor surfaces and edges.     thread gauge and  wire
                                                                                                                brush.
 5                          Re-chuck the job in the lathe machine by reversing the      End drill,vernier caliper
                             position,drill end and chuck the tailstock spindle              steel rule,chuck key,tur
                             rough turn surface to dia.96.1x201.5 and dia.85.1             ning tool.
                            x 196.5
 6.                         Check all dimensions specified in item 5. Surface              vernier caliper,micro
                             finishing should be within specified spec in design            meter screw gauge,dial                              drawing.                                                                         gauge .
7.                          Rough turn surface to dimension,finish turn with a             parting off tool,rough
                             Smooth tool.to dia 80 x 150. path-off 3x dia.75x3            ing tool, vernier caliper
                             rough turn surface to dimension,finish turn surface            steel rule and smooth
                             to dimension,finish turn with a smooth tool to             .     tool.
                              standard dimension dia 80x150.