WELDING AND CUTTING:The most likely danger to encounter in hot work application is fire and the most important precaution to observed are: hot work permit must be duly signed prior commencement of the task.the permit. and fire extinguisher should also be available in case of fire.Only the person involved to hot work that will be adjacent in and around working area.Welding to be carried by certified personnel only. In case of burns good house keeping must be adopted by wearing the necessary personal protective equipment (PPE) specified, and all necessary restricted access must be identified.
GRINDING WORK:The same fire hazards identification and dangerous work system therefore the hot-work permit should always be in place before the actual work commence.The client fire wardens and equipment must be in place before the work commence.All fire equipment certification to be checked before the task starts, only person involved in grinding shall be in place and adjacent to and around the working area.To avoid incidence cases like burns, a good house keeping culture should be adopted,and proper personal protective equipment (PPE) must be worn.
WELDING AND PRESSURE TEST. The actual task for welding inspection is radiography for cracks, and porosity detection which might results to personnel injury,damage to equipment in and around the work area, whence inspection must be conducted for certification of the personnel only to avoid unprecedented situation.And the work must be carried out by the contractor at the site.Slip and fall must be avoided by making sure that correct personal protective equipment are worn.And also to ensure that the necessary tools are available at the site.
No comments:
Post a Comment