MANUFACTURING AND MACHINING:

PRODUCTION MACHINES:The PLC controls and monitor automatic production machines at high efficiency rates. It also monitor piece count production and machines output corrective action can be taken immediately if it detects a failure.
TRANSFER LINES MACHINES: The PLCs monitor and control all transfer lines machining station operations and interlocking between each station.This system receives input from the operator to check the operating condition on the line mounted control and reports any malfunctions.These arrangement provides greater machine efficiency,higher quality products and lower scrap level.
WIRE MACHINE:The controllers monitor the line and on and off cycles of a wire drawing machines. The system provides ramping and control and synchronization of electric motor drives.
All cycles are corded and reported on demand to obtain the machines efficiency as calculated by the PLC.
TOOL CHANGING:The PLCs control the synchronous metal cutting machines with several tool groups.the system keeps the track on when each tool that should be released which is based on the number of parts it manufactures.It also displace the count and replacement of all the tool groups.
PAINT SPRAYING:The PLCs controls the painting sequences in automobile manufacturing.The operators or a host computer inters styles and colour information and track the parts through the conveyor until it reaches the spray booth.The control decodes the part information and then controls the spray gun to paint the part.The spray gun movement is optimized to conserve and increase part throughout.
AUTOMATIC PLATING LINE:The PLC controls a set of pattern for the automated host which can traverse left. right. up and down through the various plating solutions.The system knows where the host is at times,
STORAGE AND RETRIEVAL SYSTEM:The PLC is used to load parts and carry them in role to the storage and retrieved system. The controller tracks information like -line numbers,the parts to a specific lanes, and the quantity of parts in a particular lane.The PLC arrangement allows rapid change  in the status of parts loaded or unloaded from the system. The controller also provides inventory printouts,and inform the operator of any malfunctions.
CONVEYOR:The system controls all of the sequence of operation.,alarm and safety logic necessary to load and calculate  parts on main conveyor.It also sorts product to their correct lanes and earn schedule lane sorting to optimizer duty.Records,detailing the ratio of good parts .
AUTOMATED WAREHOUSING:The PLC controls and optimizes the movement of stacking cranes and provides high turn around of material requests in automated high cube,vertical warehouse.The PLC also controls aisles of conveyors and case palletizes to significantly reduce manpower requirement. Inventory control figures are maintained and could be provided on request.