APPLICATION OF ADVANCED GAS POWER PLANT SYSTEM MANAGEMENT AND CONTROL. ( schematic drawings)

I n view of the fact that gas plants and other facilities are forced to increase the performance and profitability of their production systems,mean that, engineering parameters of the operating machines  and the process networks have to be operated within their designed limits, to avoid backlashes on their performance effectiveness and control . It would creates sequential justification of the network operation and prevent production losses.In most cases needs for effective inspection of the instrument devises are very imperative to avoid unprecedented situation.. The increasing demand for petroleum products requires optimal maintenance planning, monitoring measures and operational development through adequate orientation.. Facility performance and  derivative of the necessary by- product are very important, but achieving these steps means setting out milestones through good team efforts. Manpower development  also improves adequate implementation of maintenance effectiveness., Its justification for the available maintenance safety devices should be  updated and kept to its required operational standard, through adequate inspection and site evaluation report..Since the beginning of mechanical maintenance area and primary protection has been very important in other to prevent production delay in case of failures and faults.In recent times maintenance of plants and operating facility seem to be very important to the entire society that large efforts has to made to accelerate efficient system performance integrity which militate the consequence of failure..this situation will make engineering maintenance increasingly depending on modern information technology that provide wide area protection to counteract wide area disturbance and minimize process outages.






























The prerequisite is communication network not only for supervisory control and data acquisition (SCADA) and energy management systems (EMS) but also for providing he protection, maintenance and planning department with direct access from remote to information. from the operating plants. primary and secondary equipment  fig1.0. and fig 1.2.
It will be ideal to split the communication system into two practical networks. one for real data change control and fast automatic interactions between varuous controls and system (plant stations ) amd maintenance management systems.(WAN) the non real time data e,g parameter ,measurement and monitoring data